1: ## Process this file with automake to generate Makefile.in
    2: 
    3: AUTOMAKE_OPTIONS = cygnus dejagnu
    4: ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
    5: 
    6: SUBDIRS = doc po
    7: 
    8: tooldir = $(exec_prefix)/$(target_alias)
    9: 
   10: ## These aren't set by automake, because they appear in
   11: ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
   12: ## thus is not seen by automake.
   13: CC_FOR_BUILD = @CC_FOR_BUILD@
   14: EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
   15: 
   16: YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
   17: YFLAGS = -d
   18: LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
   19: 
   20: WARN_CFLAGS = @WARN_CFLAGS@
   21: NO_WERROR = @NO_WERROR@
   22: AM_CFLAGS = $(WARN_CFLAGS)
   23: LIBICONV = @LIBICONV@
   24: 
   25: # these two are almost the same program
   26: AR_PROG=ar
   27: RANLIB_PROG=ranlib
   28: 
   29: # objcopy and strip should be the same program
   30: OBJCOPY_PROG=objcopy
   31: STRIP_PROG=strip-new
   32: 
   33: STRINGS_PROG=strings
   34: 
   35: READELF_PROG=readelf
   36: 
   37: # These should all be the same program too.
   38: SIZE_PROG=size
   39: NM_PROG=nm-new
   40: OBJDUMP_PROG=objdump
   41: 
   42: # This is the demangler, as a standalone program.
   43: # Note: This one is used as the installed name too, unlike the above.
   44: DEMANGLER_PROG=cxxfilt
   45: 
   46: ADDR2LINE_PROG=addr2line
   47: 
   48: NLMCONV_PROG=nlmconv
   49: DLLTOOL_PROG=dlltool
   50: WINDRES_PROG=windres
   51: WINDMC_PROG=windmc
   52: DLLWRAP_PROG=dllwrap
   53: 
   54: SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
   55: 
   56: bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_INSTALL_MISC@
   57: 
   58: ## We need a special rule to install the programs which are built with
   59: ## -new, and to rename cxxfilt to c++filt.
   60: RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
   61: noinst_PROGRAMS = $(RENAMED_PROGS) @BUILD_MISC@
   62: 
   63: EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
   64: 
   65: # Stuff that goes in tooldir/ if appropriate.
   66: TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
   67: 
   68: BASEDIR = $(srcdir)/..
   69: BFDDIR = $(BASEDIR)/bfd
   70: INCDIR  = $(BASEDIR)/include
   71: 
   72: MKDEP = gcc -MM
   73: 
   74: INCLUDES = -D_GNU_SOURCE \
   75:          -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
   76:          @HDEFINES@ \
   77:          @INCINTL@ \
   78:          -DLOCALEDIR="\"$(datadir)/locale\"" \
   79:          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
   80: 
   81: HFILES = \
   82:         arsup.h binemul.h bucomm.h budbg.h \
   83:         coffgrok.h debug.h dlltool.h dwarf.h nlmconv.h \
   84:         sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
   85:         windmc.h
   86: 
   87: GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
   88: 
   89: CFILES = \
   90:         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
   91:         coffdump.c coffgrok.c cxxfilt.c \
   92:         dwarf.c debug.c dlltool.c dllwrap.c \
   93:         emul_aix.c emul_vanilla.c filemode.c \
   94:         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
   95:         nlmconv.c nm.c not-ranlib.c not-strip.c \
   96:         objcopy.c objdump.c prdbg.c \
   97:         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
   98:         resbin.c rescoff.c resrc.c resres.c \
   99:         size.c srconv.c stabs.c strings.c sysdump.c \
  100:         unwind-ia64.c version.c \
  101:         windres.c winduni.c wrstabs.c \
  102:         windmc.c mclex.c
  103: 
  104: GENERATED_CFILES = \
  105:         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
  106:         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
  107: 
  108: DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
  109: WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
  110: 
  111: # Code shared by all the binutils.
  112: BULIBS = bucomm.c version.c filemode.c
  113: 
  114: BFDLIB = ../bfd/libbfd.la
  115: 
  116: OPCODES = ../opcodes/libopcodes.la
  117: 
  118: LIBIBERTY = ../libiberty/libiberty.a
  119: 
  120: .PHONY: install-html install-html-am install-html-recursive
  121: 
  122: install-html:   install-html-recursive
  123: 
  124: install-html-recursive:
  125:         @failcom='exit 1'; \
  126:         for f in x $$MAKEFLAGS; do \
  127:           case $$f in \
  128:             *=* | --[!k]*);; \
  129:             *k*) failcom='fail=yes';; \
  130:           esac; \
  131:         done; \
  132:         dot_seen=no; \
  133:         target=`echo $@ | sed s/-recursive//`; \
  134:         list='$(SUBDIRS)'; for subdir in $$list; do \
  135:           echo "Making $$target in $$subdir"; \
  136:           if test "$$subdir" = "."; then \
  137:             dot_seen=yes; \
  138:             local_target="$$target-am"; \
  139:           else \
  140:             local_target="$$target"; \
  141:           fi; \
  142:           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
  143:           || eval $$failcom; \
  144:         done; \
  145:         if test "$$dot_seen" = "no"; then \
  146:           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
  147:         fi; test -z "$$fail"
  148: 
  149: POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
  150: po/POTFILES.in: @MAINT@ Makefile
  151:         for f in $(POTFILES); do echo $$f; done | LC_COLLATE= sort > tmp \
  152:           && mv tmp $(srcdir)/po/POTFILES.in
  153: 
  154: EXPECT = expect
  155: RUNTEST = runtest
  156: 
  157: CC_FOR_TARGET = ` \
  158:   if [ -f $$r/../gcc/xgcc ] ; then \
  159:     if [ -f $$r/../newlib/Makefile ] ; then \
  160:       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
  161:     else \
  162:       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
  163:     fi; \
  164:   else \
  165:     if [ "@host@" = "@target@" ] ; then \
  166:       echo $(CC); \
  167:     else \
  168:       echo gcc | sed '$(transform)'; \
  169:     fi; \
  170:   fi`
  171: 
  172: check-DEJAGNU: site.exp
  173:         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
  174:         r=`pwd`; export r; \
  175:         EXPECT=$(EXPECT); export EXPECT; \
  176:         runtest=$(RUNTEST); \
  177:         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
  178:           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
  179:                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
  180:                         $(RUNTESTFLAGS); \
  181:         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
  182:         fi
  183: 
  184: installcheck:
  185:         /bin/sh $(srcdir)/sanity.sh $(bindir)
  186: 
  187: # There's no global DEPENDENCIES.  So, we must explicitly list everything
  188: # which depends on libintl, since we don't know whether LIBINTL_DEP will be
  189: # non-empty until configure time.  Ugh!
  190: size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  191: objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES)
  192: nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  193: ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  194: strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  195: strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  196: ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  197: cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  198: objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  199: nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  200: srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  201: sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  202: coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  203: dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  204: windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  205: windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  206: addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
  207: readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
  208: dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
  209: 
  210: LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
  211: 
  212: size_SOURCES = size.c $(BULIBS)
  213: 
  214: objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
  215: 
  216: strings_SOURCES = strings.c $(BULIBS)
  217: 
  218: readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c
  219: readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)
  220: 
  221: strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
  222: 
  223: nm_new_SOURCES = nm.c $(BULIBS)
  224: 
  225: objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS)
  226: objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
  227: 
  228: objdump.o:objdump.c
  229:         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
  230: 
  231: cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
  232: 
  233: ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
  234:         emul_$(EMULATION).c $(BULIBS)
  235: ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
  236: 
  237: ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
  238:         binemul.c emul_$(EMULATION).c $(BULIBS)
  239: ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
  240: 
  241: addr2line_SOURCES = addr2line.c $(BULIBS)
  242: 
  243: # The following is commented out for the conversion to automake.
  244: # This rule creates a single binary that switches between ar and ranlib
  245: # by looking at argv[0].  Use this kludge to save some disk space.
  246: # However, you have to install things by hand.
  247: # (That is after 'make install', replace the installed ranlib by a link to ar.)
  248: # Alternatively, you can install ranlib.sh as ranlib.
  249: # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
  250: #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
  251: #       -rm -f $(RANLIB_PROG)
  252: #       -ln $(AR_PROG) $(RANLIB_PROG)
  253: #
  254: # objcopy and strip in one binary that uses argv[0] to decide its action.
  255: #
  256: #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
  257: #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
  258: #       -rm -f $(STRIP_PROG)
  259: #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
  260: 
  261: sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
  262:         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
  263:         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
  264:         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
  265: 
  266: sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
  267:         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
  268: 
  269: sysinfo$(EXEEXT_FOR_BUILD): sysinfo.o syslex.o
  270:         $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
  271: 
  272: syslex.o:
  273:         if [ -r syslex.c ]; then \
  274:           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS) syslex.c -Wno-error ; \
  275:         else \
  276:           $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS) $(srcdir)/syslex.c -Wno-error ;\
  277:         fi
  278: 
  279: sysinfo.o:
  280:         if [ -r sysinfo.c ]; then \
  281:           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS) sysinfo.c -Wno-error ; \
  282:         else \
  283:           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS) $(srcdir)/sysinfo.c -Wno-error ; \
  284:         fi
  285: 
  286: bin2c$(EXEEXT_FOR_BUILD):
  287:         $(CC_FOR_BUILD) -o $@ $(INCLUDES) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) $(srcdir)/bin2c.c $(srcdir)/version.c
  288: 
  289: embedspu: embedspu.sh
  290:         sed "s@^program_transform_name=@program_transform_name=$(program_transform_name)@" < $< > $@
  291:         chmod a+x $@
  292: 
  293: # We need these for parallel make.
  294: arparse.h: arparse.c
  295: defparse.h: defparse.c
  296: nlmheader.h: nlmheader.c
  297: rcparse.h: rcparse.c
  298: mcparse.h: mcparse.c
  299: sysinfo.h: sysinfo.c
  300: 
  301: # Disable -Werror, if it has been enabled, since old versions of bison/
  302: # yacc will produce working code which contain compile time warnings.
  303: arparse.o:
  304:         $(COMPILE) -c $< $(NO_WERROR)
  305: arlex.o:
  306:         $(COMPILE) -c $< $(NO_WERROR)
  307: sysroff.o:
  308:         $(COMPILE) -c $< $(NO_WERROR)
  309: defparse.o:
  310:         $(COMPILE) -c $< $(NO_WERROR)
  311: deflex.o:
  312:         $(COMPILE) -c $< $(NO_WERROR)
  313: nlmheader.o:
  314:         $(COMPILE) -c $< $(NO_WERROR)
  315: rcparse.o:
  316:         $(COMPILE) -c $< $(NO_WERROR)
  317: mcparse.o:
  318:         $(COMPILE) -c $< $(NO_WERROR)
  319: rclex.o:
  320:         $(COMPILE) -c $< $(NO_WERROR)
  321: mclex.o:
  322:         $(COMPILE) -c $< $(NO_WERROR)
  323: 
  324: srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
  325: 
  326: dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
  327: dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
  328: 
  329: dlltool.o:
  330:         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
  331: 
  332: rescoff.o:
  333:         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
  334: 
  335: coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
  336: 
  337: sysdump_SOURCES = sysdump.c $(BULIBS)
  338: 
  339: # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
  340: # scripts, since they are only included conditionally.
  341: nlmconv.o: nlmconv.c $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h
  342:         ldname=`echo ld | sed '$(transform)'`; \
  343:         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
  344: 
  345: nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
  346: 
  347: windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
  348:         winduni.c resres.c $(BULIBS)
  349: windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
  350: 
  351: windmc_SOURCES = windmc.c mcparse.y mclex.c \
  352:         winduni.c $(BULIBS)
  353: windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
  354: 
  355: dllwrap_SOURCES = dllwrap.c version.c
  356: dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
  357: 
  358: 
  359: EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
  360:         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
  361:         mcparse.h mcparse.c
  362: 
  363: diststuff: $(EXTRA_DIST) info
  364: all: info
  365: 
  366: DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak
  367: 
  368: # Targets to rebuild dependencies in this Makefile.
  369: # Have to get rid of DEP1 here so that "$?" later includes all of $(CFILES).
  370: DEP: dep.sed $(CFILES) $(HFILES) $(GENERATED_CFILES) $(GENERATED_HFILES) config.h
  371:         rm -f DEP1
  372:         $(MAKE) MKDEP="$(MKDEP)" DEP1
  373:         sed -f dep.sed < DEP1 > DEPA
  374:         echo '# IF YOU PUT ANYTHING HERE IT WILL GO AWAY' >> DEPA
  375:         if grep ' /' DEPA > /dev/null 2> /dev/null; then \
  376:           echo 'make DEP failed!'; exit 1; \
  377:         else \
  378:           mv -f DEPA $@; \
  379:         fi
  380: 
  381: DEP1: $(CFILES) $(GENERATED_CFILES)
  382:         echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > DEP2
  383:         echo '# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.' >> DEP2
  384:         $(MKDEP) $(INCLUDES) $(CFLAGS) $? >> DEP2
  385:         mv -f DEP2 $@
  386: 
  387: dep.sed: dep-in.sed config.status
  388:         objdir=`pwd`; \
  389:         sed <$(srcdir)/dep-in.sed >dep.sed     \
  390:                 -e 's!@INCDIR@!$(INCDIR)!'    \
  391:                 -e 's!@BFDDIR@!$(BFDDIR)!'    \
  392:                 -e 's!@SRCDIR@!$(srcdir)!'    \
  393:                 -e "s!@OBJDIR@!$${objdir}!"   \
  394:                 -e 's!@TOPDIR@!'`echo $(srcdir) | sed -e s,/binutils$$,,`'!'
  395: 
  396: dep: DEP
  397:         sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
  398:         cat DEP >> tmp-Makefile
  399:         $(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile
  400: 
  401: dep-in: DEP
  402:         sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in
  403:         cat DEP >> tmp-Makefile.in
  404:         $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in
  405: 
  406: dep-am: DEP
  407:         sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
  408:         cat DEP >> tmp-Makefile.am
  409:         $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am
  410: 
  411: .PHONY: dep dep-in dep-am
  412: 
  413: ###
  414: 
  415: MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
  416:   binutils.log binutils.sum abcdefgh*
  417: mostlyclean-local:
  418:         -rm -rf tmpdir
  419: 
  420: CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
  421: 
  422: .PHONY: install-exec-local
  423: 
  424: install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
  425:         @list='$(RENAMED_PROGS)'; for p in $$list; do \
  426:           if test -f $$p$(EXEEXT); then \
  427:             echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
  428:             $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
  429:           else :; fi; \
  430:         done
  431:         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
  432:         for i in $(TOOL_PROGS); do \
  433:           if [ -f $$i$(EXEEXT) ]; then \
  434:             j=`echo $$i | sed -e 's/-new//'`; \
  435:             k=`echo $$j | sed '$(transform)'`; \
  436:             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
  437:               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
  438:               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
  439:                 || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
  440:             fi; \
  441:           else true; \
  442:           fi; \
  443:         done
  444: 
  445: # What appears below is generated by a hacked mkdep using gcc -MM.
  446: 
  447: # DO NOT DELETE THIS LINE -- mkdep uses it.
  448: # DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
  449: addr2line.o: addr2line.c sysdep.h $(INCDIR)/ansidecl.h \
  450:   ../bfd/bfdver.h config.h $(INCDIR)/fopen-same.h ../bfd/bfd.h \
  451:   $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h $(INCDIR)/libiberty.h \
  452:   $(INCDIR)/ansidecl.h $(INCDIR)/demangle.h $(INCDIR)/libiberty.h \
  453:   bucomm.h
  454: ar.o: ar.c sysdep.h $(INCDIR)/ansidecl.h ../bfd/bfdver.h \
  455:   config.h $(INCDIR)/fopen-same.h ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  456:   $(INCDIR)/symcat.h $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  457:   $(INCDIR)/progress.h $(INCDIR)/aout/ar.h $(BFDDIR)/libbfd.h \
  458:   $(INCDIR)/hashtab.h bucomm.h arsup.h $(INCDIR)/filenames.h \
  459:   binemul.h
  460: arsup.o: arsup.c sysdep.h $(INCDIR)/ansidecl.h ../bfd/bfdver.h \
  461:   config.h $(INCDIR)/fopen-same.h ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  462:   $(INCDIR)/symcat.h $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  463:   $(INCDIR)/filenames.h bucomm.h arsup.h
  464: bin2c.o: bin2c.c sysdep.h $(INCDIR)/ansidecl.h ../bfd/bfdver.h \
  465:   config.h $(INCDIR)/fopen-same.h ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  466:   $(INCDIR)/symcat.h bucomm.h
  467: binemul.o: binemul.c binemul.h sysdep.